Best Reloading Presses for Beginners In 2018

Are you a gun geek? Then you should probably consider reading this article. It is about the best reloading presses for beginners.

A reloading press is a system where you can assemble the cartridge or shell of your firearm. It is probably a complete package for someone who wants to avoid buying pre-produced ammunition.

First of all, it is a system which allows you to reuse the shells. Likewise, if you are planning on using the previously fired shells, follow this path. Moreover, you are completely free and do as you please!

In this article, we would like to talk about single stage presses and turret type presses. It is probably best to talk about some of the key points about reloading presses. So, we will be discussing them later on in the article.

If you are just getting started with reloading presses, we have come up with a few options. After putting in a serious amount of effort. We tried our best to bring out the features of each product with some constructive criticism.

So without wasting any more time, let's start our search for the best reloader and  gun vise

Best Reloading Presses: Things you should know

First of all, we will briefly discuss some basic terms about related to reloading presses.

Basic terms

  • Bullet Swaging: To form a bullet using pressure in a die
  • Caliber: The approximate diameter of a bullet or gun boar.
  • Case: A metal container which holds the bullet, primer and powder.
  • Decapping: It is a term implying the removal of a primer from a fired bullet.
  • Flash hole: It is a hole through which the powder gets ignited by the primer.
  • Priming: It means to put a new primer in the case.
  • Ram: It is a steel rod which runs through the center of the press holding the shell holder which takes the case into the die.
  • Resize: It means to restore the case to its original size.
  • Seater die: It is the die which seats the bullet into the mouth of the powder case which is complete with a primed case and charge.
  • play
    Sizer die: We use this die to reshape the case to the original dimension.

These are the basic terms we think you should know. Now let us talk about the classification.

Quick Answer And Our Top ten shortlist

Classification of reloading press:

1. Single-Stage Press:

  • Single stage presses are the most commonly used reloading presses.
  • They can only hold one die at a time.
  • Good for rifle reloading.
  • Rigid frame construction.
  • Slow reload rate.

2. Turret ​Press:

  • check
    They can hold multiple dies.
  • check
    Auto and manual indexing.
  • check
    They are more efficient but less accurate.

3. Progressive Press:

  • check
    They can produce a complete round per lever cycle.
  • check
    Shell plates can hold multiple cases.
  • check
    Auto or manual indexing.
  • check
    May have included case feeder.
  • check
    Efficient and accurate to some degree.

Now we jump into the review of the best reloading press for accuracy. As always, we should probably start with a comparison table for the readers’ convenience.

1. Hornady Lock N Load Auto-Progressive Reloading Press

Best Reloading Presses for Beginners

The Hornady Lock N Load Auto-Progressive Reloading Press is the first product on our list. It is probably one of the toughest contenders for reloading presses. The reason is simple, it can produce ammo at a great pace. Also, it has all the capabilities of a full-automatic reloading press.
For this reason, It is one of the best progressive press out there.

Highlighted Features:

  • EZject System:
    For a 5-stage progressive press, it certainly does have all the bells and whistles. The proprietary ejection system allows the press to run smoothly. Moreover, every single cartridge is completely ejected before another round is inserted in the press. It is a no-hassle process. So, the reloading operation is smooth without any disruptions.
  • Case Activated Powder Drop:
    For a hassle-free experience, this Hornady press has the case activated powder drop feature. It means that powder will only drop when a cartridge is completely seated. Likewise, it is a convenient process.
  • Lock-N-Load Priming System:
    Most of the progressive presses these days come equipped with a Lock-N-Load priming system. But the Hornady priming system is superior to others when it comes usability.
  • Universal Case Retainer Spring:
    The Hornady reloading press can seat a wide variety of cases. It is one of the most noteworthy features.
  • Quick Change Lock-N-Load Bushing System:
    It is a feature which enables the user to change the dies easily. 
  • Large Capacity Hopper:
    The Hornady presses come with large hoppers. It enables them to produce a large number of rounds. Moreover, the process is smooth and swift.

Pros

  • check
    Strong and Sturdy design. Built to last.
  • check
    Quick Change bushing system allows efficient work-flow.
  • check
    Built-in priming system.
  • check
    Easy to operate.
  • check
    Can produce 500 rounds in an hour.

Cons

  • Progressive type press. So, pricing is an issue.
  • May need to spend some extra cash

If are looking for one of the best progressive reloading press out there, you may want to consider having a look. The system is well-built and easy enough to operate with ease.

2. RCBS Rock Chucker Supreme Press

best progressive press

The RCBS Rock Chucker Supreme Press is the second contender on our list for the best reloading. First of all, the build quality of the product is solid and sturdy. It is well-suited for beginners and does live to the expectations. If you are looking for something versatile, you should probably read the review!

Highlighted Features:

  • Ambidextrous Handle for support:
    The cast iron ambidextrous handle is certainly a nice addition. It offers a great user experience when it comes to the application of heavy force. Likewise, it has something to offer to both right and left-handed users. Moreover, the usability and flexibility in handling are just right.
  • Primer Arm:
    A primer arm adds that extra flair to the machine. Likewise, users can easily take advantage of this arrangement. It is certainly a handy part of the system where the user can easily attach the primer smoothly. Moreover, you can work with both small and large primers.
  • Tall Clearance for a better experience:
    The 4-inch clearance allows more room. So, users have the option to reload almost any type of bullet. Whenever you are working with a wide variety of ammo, this is the choice to consider. Moreover, the sturdy build and long-lever design is a much-coveted addition.
  • Other features:
    Other notable features include the Rock Chucker Supreme Press. It can support the main ram without any issue. Also, the 5-0-5 mechanical scale, lube pad, hand primer and uniflow powder measurer are nice additions.

Pros

  • check
    Simple and sturdy design.
  • check
    Easy to set up.
  • check
    Easily upgradeable.
  • check
    Has large clearance for a large array of ammo.

Cons

  • Dies do not come with the package
  • Instructions can certainly be clearer.

RCBS Rock Chucker Supreme Press is one of the fine choices out there. The robust build quality is certainly something to consider. The feature set is suitable for any beginner. It is one of the best single-stage reloading press.

3. Lee Precision Anniversary Challenger Kit II

best single-stage reloading press

Another contender on our list for the best reloading kit is the Lee Precision Anniversary Challenger Kit II. Many of the products you will find these days are not complete. Moreover, you may need to pay some extra money to get the full kit. But the anniversary challenger kit comes with all the available goodness.

Highlighted Features:

  • Sensitive Lee Safety Scale:
    The included safety scale allows for more precise results. You can certainly get accurate measurements when making ammo. The accuracy is certainly intimidating. For this reason, we have placed it on our list for the best kit.
  • Perfect Powder Measurement:
    The system contains a decently sized hopper. For this reason, you get accurate powder measurement. The process is simple and reliable. Moreover, it offers the same results which you get with any pricey product. It is probably worth mentioning the easy-to-empty powder catcher. It is certainly a nice addition.
  • Solid Construction:
    The solid steel construction is a huge selling point. The junctions and links are solid and sturdy. They will probably last longer than many other products out there.
  • Breech Lock Quick Change Bushing for swift production:
    The Breech Lock Quick Change Bushing system allows you to change the die without any effort. It is an easy process. Also, the process allows a consistent work flow. Moreover, you can produce ammo without inconsistency. 

Pros

  • check
    Solid and Sturdy construction with easy-to-use manual
  • check
    Budget-friendly product for beginners
  • check
    Precise powder measuring is available
  • check
    Consistent and precise when producing ammo
  • check
    O-type frame for solid workflow

Cons

  • Separate pricing for essential components like bench press and mounters.
  • Die is sold separately.

The Lee Precision Anniversary Challenger Kit II is certainly perfect and checks most of the boxes. It is a robust and accurate product. It is a complete reloading kit with almost everything you need.

4. Lee Precision Classic Turret Press Kit

best turret reloading press.

If you want a convenient reloading press kit, the Lee Precision Classic Turret Press Kit should be a nice choice. First of all, it is fast and precise. It can 250 rounds an hour. Also, it is one of the best reloading kits in the market. Moreover, it is the best turret press among the lot.

Features and Benefits:

  • Preparation tools for casing:
    It is one of the reloading press for someone who also needs to prep the cartridge casings. You have all the necessary tools like lube, primer, and cutter included in the kit. Likewise, you don’t need to spend anything extra. Therefore, you should get precise results.
  • Small and large safety primers:
    The safety primers have good build quality. They are made of durable plastic. So, you should be able to operate the turret press without any issue.
  • Professional powder measuring system:
    The Pro Auto-Disk Powder measuring system is made of durable plastic. It does come with a loose lid which is convenient for clearing the priming arm. It is probably a bit odd. But you should be able to operate once you get to know it better. It is an accurate and efficient system.
  • Classic functionality:
    Apart from some of the durable plastic parts, the Lee Precision Classic Turret Press Kit is entirely made of metal. Also, the turret operation is conventional. Moreover, the lever is suitable for both left-handed and right-handed users. The kit is so strong that you may need some heavy tapping to weaken the links. 
  • Lee Safety Scale:
    The Lee safety scale is suitable for beginners. The scale is calibrated without any modern techniques. So, if a novice should become a seasoned pro after continued use. Also, the sensitivity of the scale is probably the most accurate one. For new loaders, it is the best turret reloading press.

Pros

  • check
    Sturdy build with durable plastic parts.
  • check
    User-friendly manual included for proper guidelines
  • check
    Safety Scale is precise and can detect the smallest of changes.
  • check
    Powder measuring system offers better functionality.
  • check
    Affordable pricing.

Cons

  • Bench Plate System and Classic Turret Press are not there. You need to pay extra for them

The Lee Precision Classic Turret Press Kit is effective and precise at the same time. It certainly has a lot to offer. The US-made product is strong and robust. Moreover, the included features at this price are certainly worth it. The Lee reloading kit review certainly suggests it.

5. Lee Precision Classic Turret Press (Red)

best turret press

It is somewhat similar to the previous product. Moreover, it has the same set of features. But the product does have some additional flare. For this reason, we have left a place for it on our top ten best press.

Features and Benefits:

  • Solid Steel Linkage:
    The first thing you notice about the product is the solid build quality. The links are strong enough to last for days. Also, if you do think of opening it up, you should probably keep some heavy tools near you.
  • Auto-Disk powder measure system:
    As mentioned before, the kit does come with a precise powder measuring system. It offers a solid user experience. Also, it is probably one of the most robust features of the system.
  • Automatic Indexing:
    The product features automatic indexing. The longest ram the industry produces is featured in this model. It allows even the longest rifle rounds to be loaded easily. The ram is certainly rigid. Also, there is a nice 12 inch spacing for smooth operation. 

Pros

  • check
    Robust build quality.
  • check
    Ample space to load your rounds without any problem.
  • check
    Accurate powder measuring capabilities.
  • check
    Features a long and strong handle for better usability.

Cons

  • The auto disk riser to support the Lee Safety Primer is not included in the box. You need to get it separate.

The product is certainly the right choice for beginners. The features probably speak for themselves. Therefore, we recommend our users to take a look at the product.

6. Lee Precision Classic Cast Press

single-stage reloading press

Another product which we are proud to present to you is the Lee Precision Classic Cast Press. It is a decent single-stage reloading press with a robust construction. Novices should certainly consider it. Also, the offerings are too good to pass at a price point like this.

Highlighted Features:

  • Long handle with included primer arms:
    The first thing you notice is the long handle. It offers great flexibility when handling. Also, you would probably get a nice short travel distance. Moreover, the adjustment options make it easy to operate.
    The press has two primer arms. It allows the use of large and small primer arms. So, the flexibility while using is certainly present.
  • Rigid construction:
    The cast iron construction is an added bonus at this price. Also, the powder coating gives it an aesthetically pleasing look. Therefore, you need not worry about the build-quality at all. 
  • Adjustable handle and auto-primer:
    The adjustable arm can move easily. Also, the 48-tooth ratchet like clamp handle allows precise start and stop operations. Moreover, the height is adjustable for suitable operation.

    As mentioned earlier, it comes with two primer arms. They are certainly easy to use. Also, the user can easily get comfortable with these primer arms.
  • Decent ram diameter:
    You don’t need any additional mechanism for disposal. The reason is the large ram which is drilled completely through. To get rid of spent primers, it is probably the best way. Also, you get support for 12 square inches bearing surface. 

Pros

  • check
    As expected, you get solid construction quality with this set.
  • check
    Long handle and two primer arms are convenient to have.
  • check
    Adjustable handle for decent support.
  • check
    Suitable to work with standard shells.
  • check
    Decent ram diameter with an adequate surface area.

Cons

  • Die adapter may cause problems.

The Lee Precision Classic Cast Press certainly has more positives than negatives. To get your hands on this press, try and find out more.

7. Lee Precision Breech Lock Challenger Kit

Breech Lock Challenger Kit review

Here is another sweet product for you to consider. The Lee Precision Breech Lock Challenger Kit is probably one of the best choices out there at this point. First of all, it is a single-stage press with a lot to offer. Also, there are some handy inclusions for convenience. The Breech Lock Challenger Kit review will take you through the best features.

Features and Benefits:

  • Breech Lock Challenger Press:
    The Breech Lock Challenger Press is a signature inclusion of the industry. The press offers good overall performance. The flexibility while using the press has been decent.
  • Quick bushing:
    It includes the Breech Lock Quick Change Bushing. It is a noteworthy feature to allow swift swapping capabilities. You can certainly change your die more quickly now.
  • Powder measurer and shell trimmer:
    The included Lee Safety scale and powder funnel will offer close-to perfect results. You will probably get the most out of it.
    The Value case trimmer is certainly a great inclusion. You can trim your shells in the reloading press now.
  • Auto Prime:
    If you want to prime the shells from the press, Lee has got you covered. The auto primer paired with a set of hand priming tool is convenient. 

Pros

Cons

  • You need to order the die separately.
  • List Element
  • List Element

The Breech Lock Challenger Press is one the good reloading presses for newbie. When it comes to the best reloading press, it does not have many competitors. Therefore, the product is certainly worth your time.

8. Lee Precision Breech lock Challenger Press

perfect for a reloading press

We now introduce you to the 8th contender in our review for the best reloading kit. The Lee Precision Breech lock Challenger Press (Red) has all the features you need to get started. If you are a novice, consider checking it out. The most noteworthy features are given here for your convenience.

Features and Benefits:

  • Adjustable handle for better usability:
    The press comes with an adjustable handle for better operation. It is probably a common and noteworthy offering from the folks at Lee. You never feel any discomfort with this press.
  • Frame design and linkage:
    The signature ‘O’ design analogy is just perfect for a reloading press. First of all, you get that premium feel. Also, the links and junctions can offer a better support. Moreover, the design analogy is sturdy and well worth it.
  • A Prime catcher with ample opening:
    The design offers a decent opening for smooth operation for reloading shells. Also, the prime catcher certainly makes your job a lot easier. For instance, disposing of spent primers is not a hassle anymore. The system is probably the reason behind it.
  • Smooth Bushing:
    The press comes with a Breech Lock Quick Change Bushing kit. It makes your job a lot easier if you want to change the die and place powder in the shells. Also, it offers a clean experience.

Pros

  • check
    As mentioned, the build quality is robust and is a pleasure to use.
  • check
    Smooth and precise die changing capabilities.
  • check
    Easy-to-use prime catcher.
  • check
    Adjustable handle and ample spacing for flexible workflow.

Cons

  • Priming mechanism may not be for suitable for advanced users

A product like the Lee Precision Breech lock Challenger Press is a nice choice for beginners. The features can be daunting. Therefore, we hope you would consider it as an option.

9. Lee Precision II Shotshell Reloading Press 12 GA Load All (Multi)

best press for accuracy

The 9th contender on our list for the best reloading kit is the Lee Precision II Shotshell Reloading Press 12 GA Load All (Multi). It is by far the most convenient design among the lot. Also, you may find some decent features which may please you. If you want the best press for accuracy, this is the product you need.

Features and Benefits:

  • Uniform and quick reload:
    The product is capable of reloading shells at a decent velocity. Also, the shells look a lot cleaner and uniform. Moreover, it can dish out 200 shotgun shells in an hour. Also, it can hold 5-pound shots to deliver 125 rounds
  • Prime catcher for easy disposal:
    The built-in prime catcher is convenient for easy disposals. Therefore, you get the quick user experience. 
  • Quick positioning:
    The product design allows for quick placement of shells. Also, there is a recess at every station for flexibility. Moreover, the Lee precision reloading price offers a good experience for the newbies out there.
  • Other features:
    Other features include Economical Gauge Conversion, Precise Powder Bushing and more.

Pros

  • check
    Easy-to-use and produces uniform shells.
  • check
    Quick reloading allows for faster production.
  • check
    Gauge conversion and Powder Bushing features are precise.
  • check
    Easy to place for small size.

Cons

  • Construction is not so good, can wear out easily.

If you don’t care much about the build quality, do consider this product. All the necessary features are probably there

10. Lee Reloading Press Md: 90045

the best single stage reloading press

The final product on our list is the Lee Reloading Press Md: 90045. The press has a simple and sturdy design. It is a single stage press, yet it packs a lot of power to get your shells ready. Moreover, it is one of the best single stage reloading press. Here are the few talking points for this product.

Features and Benefits:

  • Construction:
    As mentioned earlier, it features a solid cast aluminum construction. The ‘C’ design is efficient enough to provide a nice working surface. Also, the elongated handle is located at the bottom center. So, the setup is convenient enough to get the job done.
    The handle is well designed. Moreover, it can cater to both left and right-handed individuals. 
  • Breech Lock feature:
    The Breech lock enables the press to keep the dies in place. It is a convenient approach, as you can change your die very easily.
  • Other features:
    Other noteworthy features include the universality. It can take almost any kind of shell. But the shell must agree with the universal standards. Ammo sizing and decapping are quite easy due to the design analogy.

Pros

  • check
    It is suitable for large caliber rounds.
  • check
    The design makes it very easy to operate.
  • check
    Better suited for decapping process.
  • check
    The value is good for the features showcased.

Cons

  • You need to pay extra for other parts because they do not come in the box.

The product analogy is simple. Yet the value is good and the features are there. It is highly recommended for anyone willing to get started.

How to Buy a Reloading Press: A Buying Guide for Beginners

Now we would like to go over the steps to buy the best reloading kit. The steps are simple and easy to follow. Let’s get started.

1. First of all, make up your mind about the guns you want to reload. It is the initial step. Also, try to find something which is efficient and precise.

2. For each caliber you will need specific dies, and other accessories. It is probably something to think about before buying.

3. Then you would want to figure out the loading frequency and output frequency. It will help you decide where you can make compromises and save a few extra bucks.

4. Ammunition quality is a crucial factor. It will determine what type of kit you need. The more precision, the more the cost.

5. Do consider future requirements.

6. Equipment space is something which varies from one individual to another. So, it is up to you how you want to manage your space.

7. Warranty and Customer Support varies from manufacturer to manufacturer. Do your research and find which product suits your needs.

Conclusion:

Before we sign off, we would like to emphasize the fact that you make your own choices. The products showcased here will probably help you along the way. But we certainly can’t impose a choice upon you. The products here have their pluses and minuses. So, we would ask you to go through them and choose wisely.

Alice Wisbey
 

Click Here to Leave a Comment Below 0 comments

Leave a Reply:

Scroll Up
%d bloggers like this: